Louver Control - Fujitsu AG G12LVCB Series Service Instruction

7. LOUVER CONTROL

1. VERTICAL LOUVER CONTROL
(Function and Operation Range)
Each time the button is pressed,
the air direction range will change as follows:
The Remote controller's display does
not change.
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry mode : Horizontal flow
Heating mode
During AUTO mode operation, for the fi rst minute after beginning operation, airflow will be upward
the air direction cannot be adjusted during this period.
During Heating mode operation, airflow will be upward
from the indoor is low.
2. ADJUST THE RIGHT-LEFT LOUVERS
Move the Right-Left louvers to adjust airfow in the direction you prefer.
3. SWING OPERATION
To select Vertical Airflow Swing Operation
When the swing signal is received from the remote controller, the vertical louver starts to swing.
(Swinging Range)
When the indoor fan is either at S-lo or Stop mode, the swinging operation is interrrupted
and the louver stops at the memorized position.
To select Horizontal Airflow Swing Operation
(No function)
: Downward flow
01-07
(Fig 9: Air Direction Range)
when the temperature of the air issued
;