Table of Contents
Advertisement
Phone System Programming
For the i-Series
Optional Phone System Programming
14
NVM-2e/i-Series Quick Setup Guide
0401 - Tenant Group Options, Part A, Item 18: SLT Answering Mode
Enter 1 for this option to enable Conversation Record.
0401 - Tenant Group Options, Part A, Item 23: DIL Call Waiting
If setting up Immediate Voice Mail Overflow, enter 0. If setting up Delayed Voice Mail Over-
flow, enter 1.
0405 - System Timers (Part A), Item 62: DIL No Answer Recall Time
If setting up Delayed Voice Mail Overflow, enter a timer value greater than 0. Overflow will
occur after this interval (provided the other related programming is correct). If setting up
Immediate Voice Mail Overflow, enter 0.
0405 - System Timers (Part A), Item 65: Record Alert Tone Interval Time
Set the interval between Voice Mail Conversation Record alerts. The alert is two short beeps
followed by a programmable interval of silence.
0406 - COS Options, Item 57: Continued Dialing
Enable Continued Dialing (1) for all extensions that will dial Voice Mail features.
0901 - Basic Trunk Port Setup (Part A), Items 14-17; Trunk Service Type
Assign Service Type 4 to each trunk you want to ring into Voice Mail as a Direct Inward Line
(DIL).
0909 - Extension Ring Group Assignment
To enable Voice Mail Overflow, assign selected extensions to a Ring Group that will ring for
unanswered DILs to Voice Mail ports. Enter 1 to enable overflow ringing.
0910 - Trunk Ring Group Assignment
To enable Voice Mail Overflow, assign the Voice Mail DILs to the Ring Group specified in
program 0909 above. This allows calls on the DILs to ring other extensions when all VM
ports are busy.
0917 DIL Assignment
Assign a Voice Mail port as the DIL destination for each trunk that should directly ring into
Voice Mail. (Requires Trunk Service Type 4 in 0901.) If all Voice Mail ports are in the same
unique Extension (Department) Group (see Program 1003 on page 13), the DIL will ring
another Voice Mail port if its assigned port is busy.
1005 - Class of Service
Assign a Class of Service (1-15) to an extension.
1006 - Programming Function Keys
Assign a Voice Mail key to an extension (code 1059 plus extension number).
(Optional) Assign a Voice Mail Record key to an extension code (1060).
(Optional) Assign a Personal Answering Machine Emulation key (code 1072).
1027 - Fixed Call Forwarding Setup
Transferred, DIL and DID calls can forward to Voice Mail using this program.
For an extension port, assign the Fixed Call Forwarding Type (0-4) and the destination exten-
sion port (first Voice Mail extension port.) Available types are:
0 = Fixed Call Forwarding off
1 = Fixed Call Forwarding with Both Ringing (do not use for Voice Mail ports)
2 = Fixed Call Forwarding when Unanswered
3 = Fixed Call Forwarding Immediate
4 = Fixed Call Forwarding when Busy or Not Answered
Chapter 3: Phone System Programming
Advertisement
Table of Contents
