Installation Requirements
Unpacking the Equipment
Installation Requirements
Unpacking the Equipm en t
Unpacking the Equipm en t
Unpacking the Equipment
General Equipment Requirements
Phone System Requirements
6
NVM-2e/i-Series Quick Setup Guide
Unpack the Voice Mail equipment and make sure you have the following items:
NVM-2e Voice Mail cabinet (P/N 17780)
External power supply
You will also need the following items:
Standard Telecom tools, including a Phillips-head screwdriver
ESD wrist strap (to be worn at all times)
Laptop or other IBM-compatible computer containing a standard communications software
program, such as Procomm Plus
Surge Protector
Standard sheet rock (dry-wall) screws, a center-hole punch (or other pointed tool), tape, and
hammer
RJ-45 null modem cable
The manuals for your telephone system
Each Voice Mail port must be connected to an analog extension circuit in the phone system. You
may connect the Voice Mail port directly to the analog station port or to a port on a 2-OPX Module.
For each Voice Mail port, you may use:
- at least one modular line cord
- a port on a 2-OPX Module (if desired)
- cross-connect wire and modular jack assemblies (see the phone system manual for details).
Chapter 2: Installing the Voice Mail