About the Voice Mail System
The NVM-2e Cabinet
The Communication Port (COM 2)
2
NVM-2e/i-Series Quick Setup Guide
Figure 1 and Figure 2 show the front and the back of the NVM-2e cabinet.
Figure 1: Front - NVM-2e Voice Mail Cabinet
Voice Mail
Ports 1 - 4
Figure 2: Back - NVM-2e Voice Mail Cabinet
To program the NVM-2e Voice Mail system, you can use COM 2 (shown in Figure 2) with a
terminal emulation software, such as ProCom Plus or Hyper Terminal, which is installed on a
laptop computer.
IOIOI
1
2
(Currently
COM 2
Not Used)
Connect Laptop
Computer
Chapter 1: Introduction
24 VAC
0.7A 50-60Hz
DIAL-V1
AC
Power