Table of Contents
Advertisement
Using the Voice Mail
With the i-Series
Recording your call
Personal Answering Machine Emulation (Keyset Only)
38
NVM-2e/i-Series Quick Setup Guide
Keyset
1.
Press Voice Mail Record key (PGM 1006 or SC 851: code 1060)
You hear two beeps and your Record key flashes. The beeps periodically repeat to
remind you that you are recording.
To stop recording, press the Voice Mail Record key again. You can restart and stop
recording as required.
Single Line 2500 Type
1.
Hookflash
2.
Dial 154.
The system automatically reconnects you to your call.
To stop recording, hookflash twice. You can restart and stop recording as required.
To enable or cancel Personal Answering Machine Emulation:
1.
Press idle CALL key (or lift handset at DSL/SLT) and dial *2.
OR
Press your Call Forward (Station) key (PGM 1006 or SC 851: code 1080).
2.
Dial 1 and the Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
3.
Press SPK to hang up (or hang up at DSL/SLT) if you dialed *2 in step 1.
Your DND or Call Forwarding (Station) key flashes when Call Forwarding is acti-
vated.
When Answering Machine Emulation broadcasts your caller's mes-
sage, you can:
Your telephone must be idle (not on a call).
1.
Do nothing.
The message is automatically being recorded in your mailbox. The broadcast stops
when your caller hangs up.
OR
1.
Lift the handset to listen in privacy.
You do not connect to the call. Use this mode for private listening.
OR
1.
(Optional) Lift the handset.
2.
Press the flashing CALL key to intercept the call.
You connect to the caller. The system records the first part of the message in your mail-
box. The line key changes from red to green.
OR
1.
(Optional) Lift the handset.
2.
Press a line key or idle CALL key for a new call.
The message is recorded in your mailbox.
OR
Chapter 5: End-User Operation
Advertisement
Table of Contents
