Live Monitoring; Programming Live Record Function Keys - NEC EliteMail VMP User Manual

Live Monitoring

Live monitoring allows you to hear a message through the speaker of your phone as the message is being left
by an outside caller. Only one call is monitored at a time, and live monitoring is available only when your
phone is idle. New outside calls received during a live monitoring session are sent to your voice mailbox.
Enable Live Monitor
Press Live Monitor Feature Access key.
Dial station number password. (Same as station lockout (password) code).
Once Live Monitor is set the corresponding LED lights red.
Dial 7 to transfer call to the called party's mailbox.
Replace handset immediately.
N N O O T T E E :
By default, password is set at 0000000000 (10 zeros).
Live Monitor A Conversation
A live monitoring session starts as an outside caller begins leaving a message for you. To be connected
to the caller anytime during the live monitoring session, pick up the handset or press Speaker.
When you connect to the caller during a live monitoring session, the portion of the message that was
recorded before you connected is saved as a voice message in your mailbox.

Programming Live Record Function Keys

Feature Access Keys
Press Feature.
Press Redial.
Press Feature Access key to be programmed.
Dial 2.
Dial Function Code (see next page).
Press Feature.
N N O O T T E E :
Refer to the Electra Elite Multiline Telephone User Guide for additional information on
programming Feature Access keys and O O n n e e T T o o u u c c h h keys.
One Touch Keys
Press Feature.
Press Redial.
Press One Touch key to be programmed.
Dial 2.
Dial Function Code (see next page).
Press Feature.