Mixer/Tuning: Eq Gain - Korg PA800 User Manual

Use the TRACK SELECT button to switch from Keyboard to
Song tracks, and vice-versa.
Note: When you stop, then start the Song again, or select a different
Song, the default Song track settings are selected again. You can,
however, pause the Song, change the effects, then exit from pause
and start the Song again. Edit the Song in Sequencer mode to per-
manently change the effects.
Send level (A...D)
0...127 Level of the track (direct) signal sent to the effect
processor.
Play/Mute icon
Track's play/mute status. See "Keyboard track status" on
page 145 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Song Play operating mode

Mixer/Tuning: EQ Gain

In this page you can set the three-band equalization (EQ) for
each individual track.
Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice-versa.
Hi (High) Gain
This parameter lets you adjust the high frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
Sng
Mid (Middle) Gain
This parameter lets you adjust the middle frequencies equaliza-
tion on each individual track. This is a bell curve filter. Values are
shown in decibels (dB).
Low Gain
This parameter lets you adjust the low frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
Play/Mute icon
Track's play/mute status. See "Keyboard track status" on
page 145 for more information.
153
Mixer/Tuning: EQ Gain
Sng