Table of Contents
Advertisement
150
Song Play operating mode
STS Name panel
TXT File
Text Follow
When linking a ".TXT" file to a Song, you scroll the text by using
the Text Down and Text Up assignable commands. Unlike the
reading of Lyrics events contained in a Standard MIDI File, there
is no automatic scrolling, that makes the current verse start on
top of the internal and the external display at the same time.
Therefore, text shown in the internal display and in the external
video might begin with a different verse. This parameter lets you
choose the internal or the external display as the one that must
be perfectly lined.
Internal Video
When pressing the control corresponding to the
Text Down command, the first line of the current
page of text is shown on top of the internal video.
The external video might not be perfectly lined.
Choose this option if you are reading verses from
the internal display.
External Video
When pressing the control corresponding to the
Text Down command, the first line of the current
page of text is shown on top of the external video.
The internal video might not be perfectly lined.
Choose this option is your audience is reading
verses from an external video.
Note: When this option is selected, the text scrollbar
disappears from the internal display.
Text files loaded with Standard MIDI Files
When a ".TXT" file exists in the same directory as a Standard
MIDI File, and shares exactly the same name, it will be loaded
with the ".MID" file, and can be seen in the Lyrics page.
As an example, if the file "MYSONG.TXT" exists in the same
directory as the "MYSONG.MID" file, it is loaded together with
the matching ".MID" file.
However, unlike ordinary Lyrics, the text will not scroll automat-
ically while the Song is playing back. You must scroll it with the
DIAL. As an alternative, you can use an assignable switch or
footswitch, with the Text Page Up or Text Page Down functions
assigned, to scroll (respectively) to the previous or next text
page.
Note: When a ".TXT" file is loaded with the Song, it overrides any
included Lyrics data.
Playing the keyboard while reading chords
When playing the keyboard while a Song is running, if you want
to play the keyboard in C while seeing the original chords in the
display, set to Off the "Transpose applies to Style and Kbd
tracks..." parameter, and check the "Transpose applies to
Sequencer 1/2" parameter (see page 198).
STS Name panel
Sng
Select this panel to see the name of the four available STSs. See
"STS Name panel" on page 87 for details.
Mic panel
Select this panel to set parameters for the microphone input. See
"Mic panel" on page 87 for details.
Sub-Scale panel
Select this panel to select a secondary scale for the Keyboard
tracks. See "Mixer/Tuning: Sub Scale" on page 92 for details.
Pad panel
Select this panel to see which Hit or Sequence Pads are assigned
to the four Pads. See "Pad panel" on page 88 for details.
Split panel
Select this panel to adjust the split point for the Keyboard tracks.
See "Split panel" on page 88 for details.
Advertisement
Table of Contents
