Table of Contents
Advertisement
Volume panel
Press the Volume tab to select this panel. This is where you can
set the volume of each track, and mute/unmute tracks.
Use the TRACK SELECT button to switch from Normal (Key-
board and Mic/In tracks) to Song Tracks 1-8 and Song Tracks 9-
16 views.
The Normal view shows Mic/In controls and Keyboard tracks:
The Song Tracks 1-8 view shows individual Song tracks 1-8:
The Song Tracks 9-16 view shows individual Song tracks 9-16:
Track status icon
Virtual sliders (track volume)
Virtual sliders are a graphical display of each track's volume.
Touch the track's area to select a track, and use TEMPO/VALUE
controls to change the value.
The volume of Keyboard tracks may be saved to a Performance,
while the Song track volume is not memorized.
Track status icons
Play/mute status of the current track. Select the track, then press
this area to change the track status. The status of Keyboard
tracks may be saved to a Performance or STS.
See "Keyboard track status" on page 145 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Note: You can save this setting into the Global-Song Play Setup (by
choosing the "Write Global-Song Play Setup" command from the
page menu), to leave the track status unchanged when selecting a
different Standard MIDI File. This way, you can leave, for example,
the bass track in mute, and let you bassist play it live for the whole
show.
However, the above is not true when reading a Standard MIDI File
created with a Pa-Series instrument. These files do include special
commands to force the Play/Mute status of each track.
Virtual slider
Sng
Song Play operating mode
Track names
Under the sliders, a label for each track is shown. Use the TRK.
SEL button to switch between the various track views.
MIC/IN
Audio inputs. [*]
UPPER1...3 Upper tracks.
LOWER
Lower track.
T01...T16
Song tracks. [*]
[*] Volume for these tracks is not memorized.
Jukebox panel
When a Jukebox (JBX) file is assigned to Sequencer 1, you can
use the list shown in this panel to browse the Jukebox list, and
press the Select button in the display to select a Song to play. This
way, you can select any Song in the list as your starting Song, and
manually change the order of the Songs to play.
Note: A Jukebox file can be assigned to Sequencer 1 only.
Note: This panel is only available after loading a Jukebox file.
Hint: To create or edit a Jukebox file, go to the Jukebox Edit page
(see page 156). A quick way to create a Jukebox list is to press the
"Play All" button in the Song Select window (see page 81).
Warning: If you delete a Song included in the Jukebox list currently
in play, the sequencer will stop, and the "No Song" message will
appear. At this point, you can select the JukeBox tab to open the
Jukebox panel, and select a different Song.
As an alternative, you can select the next Song by pressing SHIFT +
>> (FAST FORWARD) in the SEQUENCER 1 section of the con-
trol panel, then press
(PLAY/STOP) in the SEQUENCER 1
section again.
Song list
Selected Song
Song list
Use this list to browse through the Songs in the Jukebox list. Use
the scrollbar to scroll the list.
Selected Song
Name of the Song currently in play. You can select a different
Song from the list, and press the Select button in the display to
select it for playback.
Select button
Press this button to select the Song highlighted in the list, and
assign it to Sequencer 1. If a Song is already playing, it will be
stopped, and the selected Song will start playing back.
147
Volume panel
Jukebox file
Advertisement
Table of Contents
