Exit By Saving Or Deleting Changes; Listening To The Style While In Edit Mode; List Of Recorded Events - Korg PA800 User Manual

108 Style Record mode

Exit by saving or deleting changes

Exit by saving or deleting changes
When finished editing, you can save your Style in memory, or
abort any change.
• To save changes, select the "Write Style" command from the
page menu (see "Write Style dialog box" on page 128).
• To abort all changes, select the "Exit from Record" command
from the page menu, or press the RECORD button, to exit from
record and return to the main page of the Style Record mode.
Hint: Save often while recording, to avoid accidentally losing your
Style.

Listening to the Style while in Edit mode

While you are in Style Record mode, you can listen to the
selected Chord Variation or to the whole Style, depending on
the page you are in.
To select a Chord Variation, go to the Main page of the Record/
Edit mode (see "Element (Style Element)" and "Chord Var
(Chord Variation)" on page 109).
• When you are in the Main, Event Edit, Quantize, Trans-
pose, Velocity, or Delete pages, you can listen to the
selected Chord Variation. Press START/STOP to check
how it works. Press START/STOP again to stop the play-
back.
• When you are in the Sounds/Expression, Keyboard
Range, Chord Table, Trigger/Tension, Delete All, Copy,
Style Element Controls or Style Control pages, you can
listen to the whole Style. Press START/STOP and play
some chords to do your tests. Select any Style Element
using the control panel buttons (VARIATION 1-4,
INTRO 1-2, FILL 1-2, ENDING 1-3). Press START/STOP
again to stop the playback.
Note: While in Style mode, the Fingered 3 Chord Scanning
mode is automatically selected.

List of recorded events

The Style Record mode filters out some events that may cause
wrong operation of the Style. Here are the recorded events, and
the most important filtered-out events.
Control function
Allowed
Note On
RX Noise On
Pitch Bend
Modulation
Breath
Pan
Expression
CC#12
CC#13
Damper (Hold 1)
Filter Resonance (Harmonic Content)
Low Pass Filter Cutoff (Brightness)
CC#80 (General Purpose #5)
CC#81 (General Purpose #6)
CC#82 (General Purpose #7)
Note: Some Control Change messages cannot be recorded directly
by using Pa800 integrated controls.
All allowed controllers can be assigned to an Assignable Pedal/
Slider/Switch.
MIDI Control Change messaged inserted by using a software on an
external computer are imported when using the Style to Midi
application, available from www.korgpa.com.
Some controllers are reset at the end of the pattern.
CC#
1
2
10
11
12
13
64
71
74
80
81
82