Table of Contents
Advertisement
14
Front panel
O
COLOR TOUCHVIEW™ GRAPHICAL DISPLAY
Use this display to interact with the instrument. To set the dis-
play contrast, keep the MENU button pressed, and turn the
DIAL counter-clockwise to decrease brightness, or clockwise to
increase it.
P
RECORD
This button sets the instrument to Record mode (which one
depends on the current operating mode).
Q
TRACK SELECT
Depending on the operating mode, this button switches between
the various track views.
STYLE PLAY MODE
Toggles between Keyboard and Style tracks.
SONG PLAY MODE
Toggles between Keyboard tracks, Song tracks 1-
8, and Song tracks 9-16.
SEQUENCER MODE
Toggles between Song tracks 1-8 and Song tracks
9-16.
R
SINGLE TOUCH SETTING buttons
These buttons allow to select up to four Single Touch Settings.
Each of the Styles and SongBook entries includes a maximum of
four Single Touch Settings (STS), to automatically configure
Keyboard tracks and effects, and the Voice Processor, at the
touch of a finger. When the SINGLE TOUCH LED is lit, an STS
is automatically selected when selecting a Style.
If you keep the SHIFT button pressed, and press one of
the buttons of this section, the "Write STS" window appears in
the display, with the current STS already selected, and you can
save the current keyboard track settings in a STS (see "Write Sin-
gle Touch Setting dialog box" on page 104).
S
HELP
Press this button to open the context-sensitive Help.
T
SHIFT
With this button held down, pressing certain other buttons gives
access to a second function.
U
SEQUENCER 1 TRANSPORT CONTROLS
Pa800 is equipped with two sequencers (Sequencer 1 and
Sequencer 2), each with its own set of transport controls. The
Sequencer 1 group is also used for the Sequencer mode.
<< and >>
Rewind and Fast Forward commands. If you use
them while the Song is in play, they make it scroll
back or forward.
When pressed once, these buttons move the Song
to the previous or following measure. When kept
pressed, they make the Song scrolling continu-
ously, until you release them.
In Sequencer mode, if you set a Locate Measure
other than 1, the Song goes back up to that mea-
sure (see "Locate measure" on page 171).
In Jukebox mode (Sequencer 1), keep the
SHIFT button pressed, and press these buttons to
scroll to the previous or next Song in the Jukebox
list (see "Jukebox Editor" on page 156).
(HOME)
Sends the Song Position back to measure 1 (i.e.,
the beginning of the Song).
In Sequencer mode, if you set a Locate Measure
other than 1, the Song Position goes back to that
measure (see "Locate measure" on page 171).
(PLAY/STOP)
Starts or stops the Song from the current Song
Position.
In Song Play mode, pressed while keep-
ing SHIFT pressed, starts both sequencers at the
same time.
V
SEQUENCER BALANCE slider
In Song Play mode, this slider balances the volume of the two
on-board sequencers. When fully on the left, only Sequencer 1
can be heard. When fully on the right, only Sequencer 2 can be
heard. When in the middle, both sequencers play at full volume.
This slider does not work in Style Play or Sequencer mode.
W
SEQUENCER 2 TRANSPORT CONTROLS
Transport controls for Sequencer 2. See instructions for
Sequencer 1 above.
X
TEMPO/VALUE section
The DIAL and the DOWN/- and UP/+ buttons can be used to
control the Tempo, assign a different value to the selected
parameter in the display, or scroll a list of files in the Song Select
and Media pages.
DIAL
Turn the dial clockwise to increase the value or
tempo. Turn it counter-clockwise to decrease the
value or tempo.
When used while pressing the SHIFT but-
ton, this control always acts as a Tempo control.
When used while pressing the MENU
button, this control always acts as a Display Con-
trast control.
DOWN/- and UP/+
DOWN/- decreases the value or tempo; UP/+
increases the value or tempo.
Press both buttons together to reset the Tempo to
the value memorized in the selected Style.
Y
EXIT
Use this button to perform various actions, leaving from the cur-
rent status:
•
exit the edit menu page, without selecting any item
•
make the page menu disappear, without selecting any
item
•
return to the main page of the current operating mode
•
exit the Global or Media edit environment, and return
to the current page of the current operating mode
•
exit from a Style, Performance or Sound Select window
SB
Sty
Advertisement
Table of Contents
