Table of Contents
Advertisement
124
Style Record mode
Style Element Track Controls: Keyboard Range
Expression area
Use these knobs to set the Expression (CC#11) value for the cor-
responding track. This value can be seen at the beginning of the
Event Edit list (see "Event Edit: Event Edit" on page 116).
Different Expression values can be defined for each Style Ele-
ment. This way, you can set a different volume in each Style Ele-
ment, relative to the general Volume value set in the Style
Header.
Volume area
Use these controls to set the volume and status of each track. See
page 111 for more information.
The Volume value is the same for the whole Style. Use the
Expression controls to adjust the relative balance between tracks
in each Style Element.
Style Element Track Controls: Keyboard
Range
The Keyboard Range automatically transposes any pattern note
that would otherwise play too high or too low in pitch, com-
pared to the original acoustic instrument, when transposed by
the arranger. This will result in a more natural sound for each
accompaniment instrument.
For example, the lower limit for a guitar is E2. If you play a chord
under the E2, the transposed pattern could exceed this limit, and
sound unnatural. A Bottom limit set to E2 for the guitar track
will solve the problem.
Different Keyboard Range values can be set for each Style Ele-
ment.
Note: The Keyboard Range is ignored while recording. The selected
track can play on the full range of the keyboard.
When in this page, press the corresponding button on the con-
trol panel to select a Style Element (VARIATION1 ...
ENDING3).
To copy the settings of this page to another Style Element, use
the "Copy Keyboard Range" command from the page menu (see
"Copy Key Range dialog box" on page 129).
Top/Bottom
Use these parameters to set the bottom and top of the keyboard
range for the corresponding track of the current Style Element.
Volume area
Use these controls to set the volume and status of each track. See
page 111 for more information.
Style Element Chord Table: Chord Table
This is the page where you can assign a Chord Variation to each
of the most important recognized chord. When a chord is recog-
nized, the assigned Chord Variation will be automatically
selected by the arranger to play the accompaniment.
When in this page, press the corresponding button on the con-
trol panel to select a Style Element (VARIATION1 ...
ENDING3).
Chord / Chord Variation
Use these parameters to assign a Chord Variation to each of the
most important chords.
Style Track Controls: Type/Trigger/Tension
In this page you can set the Mode, Retrigger mode for the Style
tracks, and activate/deactivate the Tension for the Accompani-
ment tracks.
When in this page, press the corresponding button on the con-
trol panel to select a Style Element (VARIATION1 ...
ENDING3).
Track Type
Use this parameter to set the type of the corresponding track.
Drum
Drum track. This type of track is not transposed
by the arranger, and is used for Drum Kits made
of Drum sounds. It can be affected by the Drum
Advertisement
Table of Contents
