Korg PA800 User Manual page 149

If you select another Song while a Song is in play within the same
Sequencer, the previous Song stops, and the new Song will be
selected, ready to play.
To select a Song, an alternative is to press the SELECT button
(on the control panel) corresponding to the desired sequencer.
Press SELECT a second time to select a Song by dialing in its ID
number (see "Selecting a Song by its ID number" on page 81).
SEQUENCER 1
SELECT <<
Meter
Current Song Time Signature.
Measure number
Current measure number.
Tempo
Metronome tempo. Select this parameter and use the TEMPO/
VALUE controls to change the tempo. As an alternative, you
don't need to select this parameter; just keep the SHIFT button
pressed and use the DIAL to change the tempo of the selected
sequencer.
Hint: While in the main page, you can have the Tempo parameter
of Sequencer 2 "on focus", while Sequencer 1 is selected. In this situ-
ation, you can use the DIAL to change Tempo for Sequencer 2, and
SHIFT + DIAL to change Tempo for Sequencer 1.
Style area
Currently selected Style. You can select a Style while playing
Songs, to have it ready when switching to Style Play mode. Also,
this lets you change the Pad and STS settings (since Pads and
STSs are recalled by a Style).
Press the Style name to open the Style Select window. As an
alternative, use the STYLE SELECT section on the control panel.
Selected Style
Performance/STS area
This is where the Performance or STS name is shown.
Selected Performance
or STS
Selected Performance or STS
This is the latest selected Performance (PERF) or Single Touch
Setting (STS).
Press the name to open the Performance Select window. As an
alternative, use the PERFORMANCE/SOUND SELECT section
to select a different Performance.
>>
Song Play operating mode
To select a different STS from the latest selected Style, use the
four SINGLE TOUCH SETTING buttons under the display.
Keyboard tracks area
This is where Keyboard tracks are shown.
Sound
name
Track's octave transpose
Sound name
Name of the Sound assigned to the corresponding Keyboard
track.
• If the track is already selected (white background), press the
Sound name to open the Sound Select window.
• If the track is not selected (dark background), first select it,
then press the Sound name to open the Sound Select window.
For more information about the Sound Select window, see
"Sound Select window" on page 78.
Keyboard track octave transpose
Non editable. Octave transpose of the corresponding track. To
individually edit the octave transpose for each track, go to the
"Mixer/Tuning: Tuning" edit page of the Song Play mode (see
"Mixer/Tuning: Tuning" on page 92 for more details).
You can also transpose all Upper tracks by using the UPPER
OCTAVE buttons on the control panel.
Keyboard track name
Non editable. Name of the corresponding track:
Abbreviation Track
UP1 Upper 1
UP2 Upper 2
UP3 Upper 3
LOW Lower
Sound bank's icon
This picture illustrates the bank the current Sound belongs to.
Keyboard track status
Play/mute status of the current track. Press this icon to change
the status.
No icon Play status. The track can be heard.
Mute status. The track cannot be heard.
145
Main page
Track name
Sound
bank's icon
Track status
Hand
Right hand
Left hand