Selecting And Playing A Style - Korg PA800 User Manual

Selecting and playing a Style

1
Press the Style area in the display. The Style Select window appears.
The selected Style is highlighted.
Press a Style's name to select it.
Press one of the side tabs to
select a different Style bank.
2
Select a Style from the Style Select window.
3
Be sure one of the Chord Scanning modes is selected.
CHORD SCANNING
LOWER UPPER
FULL
Set of banks. [1/10] corresponds to the top row
of Styles on the control panel, [11/20] to the
lower row, [Favorite] to the Favorite Styles.
Press one of the lower tabs to
select a different Style page.
The Style Select window closes,
and the main screen appears
again, with the selected Style
ready to go.
For chord scanning to work, either of both LEDs must be
turned on. Lower: chords are recognized on the left of the
split point; Upper: chords are recognized on the right of
the split point; Full: chords are recognized on the whole
keyboard. Off: only the Drum track can be heard.
Selecting and playing Styles
Selecting and playing a Style
i
Note: You can open
the Style Select window
also by pressing one of
the buttons in the STYLE
SELECT section. This will
let you jump directly to
the desired Style bank.
PIANO
SAX
i
Note: You
can leave the
Style
window open
in the display, even after
selecting a Style. Just
press the DISPLAY HOLD
button to turn its LED
on. In this case, press the
EXIT button to exit from
a window.
43
MALLET DIGITAL STRINGS & TRUMPET &
E.PIANO & BELL ACCORDION ORGAN DRAWBARS GUITAR VOCALS TROMBONE BRASS
1 2 3 4 5 6 7 8 9 0
WOODWIND SYNTH 1 SYNTH 2 BASS DRUM & PERC SFX USER 1 USER 2 USER DK
DISPLAY
HOLD
Select