Setup; Installing A Microsd Card - Motorola TC70 User Manual

20 | Getting Started
Number
22
23
24
25
26
27
28
29

Setup

When and where to use: Perform this procedure to start using the TC70 for the first time.
Procedure:
1 Install a micro secure digital (SD) card (optional).
2 Install hand strap (optional).
3 Install the battery.
4 Charge the TC70.
5 Power on the TC70.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to
the documentation provided with the card for more information, and follow the manufacturer's recommendations for
use.
Caution: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
Procedure:
1 Remove the hand strap, if installed.
2 Lift the access door.
Figure 4: Lift Access Door
Item Function
Volume Up/Down Increase and decrease audio volume (programmable).
Button
Battery Release Press to remove the battery.
Latches
Elastic Sleeve Use to hold optional stylus.
Battery Provides power to the device.
Hand strap Use to securely hold the device in your hand.
Hand strap Mount- Provides latching point for the hand strap.
ing Point
Camera Takes photos and videos.
Camera Flash Provides illumination for the camera.