Chapter 1: Getting Started; Setup; Installing A Microsd Card - Motorola MC32N0 Integrator Manual

Chapter
1
Getting Started
This chapter provides information for getting the device up and running for the first time.

Setup

To start using the MC32N0 for the first time:
• Install a microSD card (optional)
• Install the battery
• Charge the MC32N0
• Power on the MC32N0.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to
the documentation provided with the card for more information, and follow the manufacturer's recommendations for
use.
Caution: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
Note: On Android devices, after installing the microSD card, the device will automatically reset. This
ensures proper reading of the file content on the microSD card.
Procedure:
1 Remove the microSD card cover.
Figure 5: Remove microSD Card Cover
2 Slide the microSD card holder down to unlock.
19 | Getting Started
MN000887A01-B | April 2015