MN002858A01-A
Chapter 2: Getting Started
Figure 3: Removing the Screen Protective Film
2.3.2
Removing the Battery Cover
This procedure explains how to remove the battery cover.
Procedure:
1 Hold the device firmly as shown.
2 Using the battery cover removal slot, gently lift the battery cover up and away.
Figure 4: Removing the Battery Cover
2.3.3
Installing a microSD or CRYPTR micro Encryption Card
The LEX L10g card holder can support either a microSD card or a CRYPTR micro encryption card.
The microSD card is a removable flash memory used for storing media on the device. The device can
support microSD cards with up to 64GB memory space. A CRYPTR micro encryption module can
optionally be installed in the SD card slot of the LEX L10g. The CRYPTR micro provides FIPS 140-2
34
Send Feedback