MSI MS-9125 User Manual page 73

IRQ Resources
The items are adjustable only when Resources Controlled By is set to Manual.
Press <Enter> and you will enter the sub-menu of the items. IRQ Resources
list IRQ 3/4/5/7/9/10/11/12/14/15 for users to set each IRQ a type depending
on the type of device using the IRQ. Settings are:
PCI Device For Plug & Play compatible devices designed for PCI
bus architecture.
Reserved The IRQ will be reserved for further request.
PCI/VGA Palette Snoop
When set to Enabled, multiple VGA devices operating on different buses can
handle data from the CPU on each set of palette registers on every video
device. Bit 5 of the command register in the PCI device configuration space is
the VGA Palette Snoop bit (0 is disabled). For example, if there are two VGA
devices in the computer (one PCI and one ISA) and the:
VGA Palette Snoop
Bit Setting
Disabled Data read or written by the CPU is only directed to the PCI
VGA device's palette registers.
Enabled Data read or written by the CPU is directed to both the PCI
VGA device's palette registers and the ISA VGA device's
palette registers, permitting the palette registers of both VGA
devices to be identical.
The setting must be set to Enabled if any ISA bus adapter in the system re-
quires VGA palette snooping.
PCI-X Frequency
This setting is used to set the frequency of the onboard 64-bit PCI-X bus slots.
Setting options: Auto, 33MHz, 66MHz, 100MHz, 133MHz.
BIOS Setup
Action
3-27