MSI MS-9125 User Manual page 61

IRQ6 when the system contains no floppy drive. When this setting is set to
Yes, users have to select Disabled for the Onboard FDC Controller in the
Integrated Peripherals menu. Setting options: Yes, No.
Small Logo(EPA) Show
This setting enables you to show the EPA logo (brand specific graphics) on
the bootup screen. Setting options:
Disabled Shows the normal POST screen at boot.
Enabled Shows a still image (EPA logo) on the screen at boot.
DMI Event Log
This setting disables/enables the BIOS to log DMI (Desktop Management
Interface) events. Setting options: Disabled, Enabled.
Clear All DMI Event Log
When this setting is set to Yes, the DMI event log will be cleared at next POST
stage. Then, the BIOS will automatically set this option to No. Setting options:
Yes, No.
View DMI Event Log
Press Enter to view all DMI event logs.
Mark DMI Events as Read
Press Enter and a screen pops up, asking users to confirm whether or not to
clear all DMI event logs immediately. Press Y and Enter, the BIOS will clear
all DMI event logs right away.
BIOS Setup
3-15