System Id Led Connector: J30; System Id Button Connector: J38 - MSI MS-9125 User Manual

MS-9125 SSI Mainboard

System ID LED Connector: J30

The connector is used to connect the System ID LED on the front panel.
Please note that this connector is specifically designed for MSI MS-9206 &
MS-9214 rackmount servers only.

System ID Button Connector: J38

The connector is used to connect the System ID Button on the front
panel to facilitate system management. Please note that this connector is spe-
cifically designed for MSI MS-9206 & MS-9214 rackmount servers only.
J30
1
J30 Pin Definition
PIN SIGNAL
1 GND
2 LED1
3 LED2
2-20
J38