Central Processing Unit: Cpu - MSI MS-9125 User Manual

Central Processing Unit: CPU

The mainboard supports Single/Dual Intel
mainboard uses two CPU sockets called Socket 604 for easy CPU installation.
You can install SINGLE or DUAL CPUs on the board to meet your own
needs. Keep the following points in mind before installing CPU(s):
1. If SINGLE CPU is intended, always install the CPU on the CPU1
socket.
2. To install DUAL CPUs on the board, you must use the same type
of CPUs running at the same FSB frequency.
When you are installing the CPU, make sure the CPU has a Heat Sink
and a cooling fan attached on the top to prevent overheating. If you do
not find the Heat Sink and cooling fan, contact your dealer to purchase and
install them before turning on the computer.
MSI Reminds You...
Overheating will seriously damage the CPU and system, always
make sure the cooling fan can work properly to protect the CPU
from overheating.
The system temperature needs to remain under 45°C.
We highly recommend that the direction of inlet air should follow
the direction indicated above for better cooling effect.
Hardware Setup
®
Xeon™ processor(s). The
Recommended inlet air direction
CPU1
2-3