MS-9125 SSI Mainboard
IPMI V1.5 BIOS Features
This setup screen appears only when the mBMC chip (for Server
Management) is integrated on the mainboard.
PEF Configuration Status
This option shows the current Platform Event Filter (PEF) configuration status.
(Read only)
Setting PEF Configuration
This setting is used to set the Platform Event Filter (PEF) configuration. When
[Enabled] is selected, the server will send the event signal to the BMC. Set-
ting options: Enabled, Disabled.
BMC Event Log
Select [Enabled] to store POST error or initial messages to the BMC Event
log. If you don't want to store POST error or initial messages to the DMI
Event log, select [Disabled]. When [Cleared] is selected, the BMC event log
will be cleared at next POST stage. Setting options: Disabled, Enabled, Cleared.
WatchDog TimeOut Action
The Watch Dog Timer (WDT) is a special hardware device to monitor if the
computer system works normally. If the system does not work normally, it
will have some measures to fix up the system. The following actions are avail-
3-8