Table of Contents
Advertisement
Onboard LAN
The field determines whether the onboard Giga-bit LAN controller is
activated. Setting options: Enabled, Disabled.
Onboard SCSI
The field determines whether the onboard SCSI controller is activated.
Setting options: Enabled, Disabled.
Onboard RAID Device
This setting controls the onboard RAID device. Setting options: Enabled,
Disabled.
Onboard LAN/LAN2 Boot ROM
This setting enables/disables the initialization of the onboard LAN/LAN2
Boot ROM during bootup. Selecting Disabled will speed up the boot
process.
Super IO Device
Press <Enter> to enter the following sub-menu screen.
POWER ON Function
This setting controls which part on the PS/2 mouse or keyboard can power
on the system. Settings: Password, Hot KEY, Mouse Left, Mouse Right,
Any Key, BUTTON ONLY and Keyboard 98. Please note that this function
only works under S3 mode.
KB Power ON Password
If POWER ON Function is set to Password, then you can set a password in
BIOS Setup
3-21
Advertisement
Table of Contents
