MSI MS-9125 User Manual page 60

MS-9125 SSI Mainboard
MPS Version Control For OS
This field allows you to select which MPS (Multi-Processor Specification)
version to be used for the operating system. You need to select the MPS ver-
sion supported by your operating system. To find out which version to use,
consult the vendor of your operating system. Settings: 1.4, 1.1.
OS Select For DRAM > 64MB
This allows you to run the OS/2 ® operating system with DRAM larger than
®
64MB. When you choose Non-OS2, you cannot run the OS/2 operating
system with DRAM larger than 64MB. But it is possible if you choose OS2.
Console Redirection
Console Redirection operates in host systems that do not have a monitor and
keyboard attached. This setting enables/disables the operation of console
redirection. When set to Enabled, BIOS redirects and sends all contents that
should be displayed on the screen to the serial COM port for display on the
terminal screen. Besides, all data received from the serial port is interpreted as
keystrokes from a local keyboard. Setting options: Enabled, Disabled.
Baud Rate
This setting specifies the transfer rate (bits per second) of Console Redirection.
Setting options: 9600, 19200, 38400, 57600, 115200.
Agent Connect Via
To operate the system's console redirection, you need a terminal supporting
ANSI terminal protocol and a RS-232 null modem cable connected between
the host system and terminal(s). This field is a read-only field, which is used
to indicate the type of device connected between the host system and terminal
(s). NULL stands for a null modem.
Agent Wait Time (min)
This setting controls the timeout for terminals' (console redirection) connec-
tion to the host system. Setting options: 1, 2, 4, 8 (Min).
Agent After Boot
This setting determines whether or not to keep terminals' console redirection
running after the OS has booted. Setting options: Disabled, Enabled.
Report No FDD For WIN 95
For compatibility with Windows 95 logo certification, select Yes to release
3-14