Getting Started With The Configuration Manager; Accessing The Configuration Manager - CTC Union atu-r130 User Manual

4
Getting Started with the Configuration
Manager
The ATU-R130 includes preinstalled program called the Configuration Manager, which{ XE
"Configuration Manager:overview" } provides an interface to the software installed on the
device. It enables you to configure the device settings to meet the needs of your network.
You access it through your web browser from any PC connected to the ATU-R130 via the
LAN port.
The ATU-R130 may already be configured to provide Internet
connectivity for your network. If it works properly with the
preconfigured settings, then you may not need to use the
Configuration Manager. Contact your ISP to determine which
Note
settings you may need to change, if any.

Accessing the Configuration Manager

{ XE "System requirements:for Configuration Manager" }{ XE "Web browsers:compatible
versions" }{ XE "Login:to Configuration Manager" }The Configuration Manager program is
preinstalled into memory on the ATU-R130. To access the program, you need the
following:
? A PC or laptop connected to the LAN port on the ATU-R130.
? A web browser installed on the PC{ XE "Web browser: version requirements" }. The
program is designed to work best with Microsoft Internet Explorer® version 5.0,
Netscape Navigator® version 4.7, or later versions.
You can access the program from any computer connected to the ATU-R130 via the LAN
or USB ports.
1. From a LAN computer, open your web browser, type the following URL in the web
address (or location) box, and press <Enter>:
http://192.168.1.1
Or, from the USB computer, type:
http://198.168.1.2
These are the predefined IP addresses for the LAN and USB ports on the ATU-R130.
A login screen displays, as shown in Figure .
15
ATU-R130 ADSL Ethernet Router User' s Guide
Figure 10. Login Screen