Modifying Atm Vccs - CTC Union atu-r130 User Manual

ATU-R130 ADSL Ethernet Router User' s Guide

Modifying ATM VCCs

Your device may already be preconfigured with the necessary ATM VCC properties, or the table
may contain placeholder values that you must change before using the device. Contact your ISP
to determine your ATM VCC values. Follow these instructions to modify a preconfigured VCC:
1. From the ATM VCC Configuration page, click
you want to modify.
The ATM VCC Interface – Modify page displays, as shown in Figure 36.
Figure 35. ATM VCC Interface – Modify Page{ XE "ATM VCC – Add page" }{ XE "Pages:ATM VCC -
2. Enter the new VPI and VCI values, select the MUX type, or change the maximum number
of protocols that the VCC can carry, as directed by your ISP.
You cannot modify the interface type over which an existing VCC operates (aal5-0, for
example). If you want to change the interface type, you must delete the existing interface,
create a new one, and select the desired interface type.
3. Click .
4. On the confirmation page, click
5. Click the Admin tab, and then click
6. Click
7. You can verify that the new settings work by attempting to access the Internet from a
LAN/USB computer. Contact your ISP for troubleshooting assistance.
46
Add" }
Commit & Reboot
to save your changes to permanent memory.
in the Actions column for the interface
to return to the ATM VCC Configuration page.
in the task bar.