Introduction; Features; System Requirements - CTC Union atu-r130 User Manual

1

Introduction

Congratulations on becoming the owner of the ATU-R130 ADSL Ethernet bridge/router. Your LAN
(local area network) will now be able to access the Internet using your high-speed ADSL
connection.
This User Guide will show you how to install and set up the ATU-R130 ADSL Bridge/Router, and
how to customize its configuration to get the most out of your new product.

Features

? { XE "Features" }Internal ADSL modem for high-speed Internet access
? 10/100Base-T Ethernet router to provide Internet connectivity to all computers on your
LAN
? USB port for connecting a USB-enabled PC
? Network address translation (NAT), Firewall, and IP filtering functions to provide security
for your LAN
? Network configuration through DHCP Server and DHCP Relay
? Services including IP route and DNS configuration, RIP, and IP and DSL performance
monitoring
? Configuration program you access via an HTML browser

System Requirements

{ XE "System requirements:" }In order to use the ATU-R130 ADSL/Ethernet router, you must
have the following:
? ADSL service up and running on your telephone line, with at least one public Internet
address for your LAN
? One or more computers each containing an Ethernet 10Base-T/100Base-T network
interface card{ XE "Network interface card" } (NIC) and/or a single computer with a USB
port
? An Ethernet hub/switch, if you are connecting the device to more than one computer on
an Ethernet network.
For system configuration using the supplied web-based program: a web browser{ XE "Web
browser:requirements" } such as Internet Explorer v5.0 or later, or Netscape v4.7 or later
1
ATU-R130 ADSL Ethernet Router User' s Guide