Cables - Motorola MC3000 User Manual

5 - 8 MC3000 User Guide

Cables

Table 5-7 Troubleshooting the Cables
Symptom
Mobile computer
amber Charge LED
Indicator does not
light when mobile
computer attached.
Mobile computer
battery is not
charging.
During data
communication, no
data was
transmitted, or
transmitted data was
incomplete.
Possible Cause
Cable is not receiving Ensure the power cable is connected securely to both the cable
power. and to AC power.
Mobile computer is not Remove and re-attach the mobile computer to the MC3000
seated correctly in the connector, ensuring it is correctly seated.
cable.
Mobile computer was Ensure cable is receiving power. Ensure the mobile computer is
detached from cable or seated correctly. If the mobile computer battery is fully depleted, it
cable was unplugged can take up to four hours to fully recharge a Standard Battery and
from AC power too it can take up to six hours to fully recharge an Extended Life
soon. Battery.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
The mobile computer is Remove and re-attach the mobile computer to the cable, ensuring
not fully seated in the it is correctly seated.
cable.
Cable removed from Reattach cable to mobile computer and retransmit.
mobile computer during
communication.
Incorrect cable See the system administrator or refer to the MC3000 Integrator
configuration.
Guide.
Communication See the system administrator or refer to the MC3000 Integrator
software is not installed
Guide.
or configured properly.
Solution