Battery Charging And Operating Power; Led Charge Indications - Motorola MC3000 User Manual

Figure 4-4 Cables

Battery Charging and Operating Power

Ensure that you follow the guidelines for battery safety described in
CAUTION
The MC3000 Communication/Charge cables can charge the mobile computer battery and supply operating power.
To charge the mobile computer battery:
1. Connect the MC3000 Communication/Charge cable power input connector to the Symbol approved power
source.
2. Slide the bottom of the mobile computer into the MC3000 connector end of the MC3000
Communication/Charge cable and gently press in until the snaps latch into the mobile computer.
3. The mobile computer amber Charge LED Indicator indicates the mobile computer battery charging status. The
Standard Battery usually charges in less than four hours and the Extended Life Battery usually charges in less
than six hours. See,
4. When charging is complete, remove the cable by gently pulling the mobile computer and the cable apart until
the snaps release the mobile computer.

LED Charge Indications

The MC3000 Communication/Charge cables use the amber Charge LED Indicator to indicate the MC3000 battery
charging status. See,
Table 4-1 on page 4-4
for charging status indications.
Table 4-1 on page 4-4
for charging status indications.
Snaps
Battery Safety Guidelines on page
Accessories 4 - 9
5-1.