Cables; Battery Charging And Operating Power - Motorola MC65 User Manual

10 - 12 MC65 User Guide
Battery LED Charging Indicators (Continued)
Table 10-3
LED
Slow Blinking Amber
Solid Amber
Fast Blinking Amber

Cables

This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
•
USB Charging cable
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC65 and a host computer. With customized or third party
software, it can also synchronize the MC65 with corporate databases.
•
Charge Only cable
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
•
Auto Charge cable.
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.

Battery Charging and Operating Power

The communication/charge cables can charge the MC65 battery and supply operating power.
To charge the MC65 battery:
Connect the communication/charge cable power input connector to the Motorola approved power source.
1.
Slide the bottom of the MC65 into the connector cup end of the communication/charge cable and gently
2.
press in until it latches into the MC65.
Slide the two locking tabs up until they both lock into position.
3.
Battery is charging.
Charging complete.
Charging error.
Indication