Serial Port Services - Motorola MC3000 User Manual

3 - 20 MC3000 User Guide
5. Tap the remote device folder.
6. Tap and hold on the remote device and select
7. Tap and hold on the headset service name and select
8. The mobile computer connects to the headset. Refer to your headset user manual for instruction on
communicating with a Bluetooth device.
To adjust the microphone gain:
1. Tap and hold on the headset service item and select
Microphone Properties
2. Select the slider and adjust the gain.
3. Tap .
OK

Serial Port Services

NOTE By default, COM ports COM4, COM5 and COM9 are Bluetooth virtual ports. If an application opens one of
these ports, the Bluetooth driver activates and guides you through a Bluetooth connection.
Use the wireless Bluetooth serial port connection just as you would a physical serial cable connection. You must
configure the application that will use the connection to the correct serial port.
To establish a serial port connection:
1. Ensure the mobile computer is discoverable and connectable. See
2. Discover and bond (pair) with the remote device.See
3. In , select the
BTExplorer
4. Select the
Trusted Devices
5. Tap the remote device folder.
6. Tap and hold
Serial Port
appears.
Figure 3-27 Remote Service Connection Window
7. In the
Local COM Port
8. Tap .
OK
Explore
window appears.
folder.
Remote Devices
folder.
and select in the pop-up menu. The
Connect
drop-down list select a COM port.
. A headset service item appears.
.
Connect
from the pop-up menu. The
Adjust Microphone
Bluetooth Settings on page
Bonding with Discovered Device(s) on page
Remote Service Connection
3-21.
3-9.
window