Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following MC75A communication/charge cables are available:
•
Serial (RS232) Charge cable (9-pin D female with power input receptacle)
•
USB Client Charge cable (standard-A connector and a barrel receptacle for power)
•
Auto charge cable
•
DEX cable
•
Modem inverter cable
•
Charge only cable.
The following printer cables are available directly from Motorola.
•
O'Neil Printer cable
•
Zebra Printer cable.
Cables (MC75A Connector)
Figure 2-24
The communication/charge cables:
•
Provide the MC75A with operating and charging power.
•
Synchronize information between the MC75A and a host computer. With customized or third party
software, it can also synchronize the MC75A with corporate databases.
•
Provide serial connection through the serial pass-through port for communication with a serial device,
such as a host computer. For communication setup procedures, see
2-26.
•
Provide USB connection through the USB pass-through port for communication with a USB device, such
as a host computer. For communication setup procedures, see
Dedicated printer cables provide communication with a printer.
Setup
The MC75A communication/charge cables can connect with a serial/USB device, such as a printer or host
computer, through its serial or USB port.
Accessories 2 - 25
Communication Setup on page
Communication Setup on page
2-26.