Headset; Cables - Motorola FR68 Series User Manual

Spare Battery LED Charging Indicators
Table 6-2
LED
Off
Slow Blinking
Amber
Solid Amber

Headset

Use the headset to communicate via Voice-Over-IP (VOIP) or for audio playback and telephony
applications. To connect the headset, remove the plug from the headset jack at the top of the
FR68 Series and insert the headset connector. Contact a Zebra representative for compatible
headsets.
For best performance, Zebra recommends a 2.5mm jack headset, p/n 90-17C28-001R.
Headset Connection
Figure 8-5

Cables

This section describes how to set up and use the cables. The cables are available with a variety
of connection capabilities.
The following communication/charge cables are available:

USB Client Charge cable (standard-A connector and a barrel receptacle for power)

Auto charge cable

Charge only cable.
Communication/charge cables:

Provide the FR68 Series with operating and charging power when used with the approved
power supply.

Synchronize information between the FR68 Series and a host computer.

Provide USB connection through the USB pass-through port for communication with a USB
device, such as a host computer.
No spare battery in slot; battery is not charging; battery is not inserted correctly in
the charger; charger is not powered.
Spare battery is charging.
Charging complete.
117
Indication
Accessories