Cables - Motorola MC32N0 Integrator Manual

Problem

Cables

Table 17: Troubleshooting the Cables
Symptom
MC32N0 amber Charge
LED Indicator does not
light when MC32N0 is
attached.
MC32N0 battery is not
charging.
During data communica-
tion, no data transmits,
or transmitted data was
incomplete.
Cause Solution
from AC power
too soon.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Possible Cause
Cable is not receiving pow-
er.
MC32N0 is not seated cor-
rectly in the cable cup.
MC32N0 was detached
from cable or cable was un-
plugged from AC power too
soon.
Battery is faulty.
The MC32N0 is not fully
seated in the cable.
Cable was disconnected
from MC32N0 during com-
munications.
Incorrect cable configura-
tion.
Communication software is
not installed or configured
properly.
Maintenance and Troubleshooting | 167
Action
Ensure the power cable is connected securely to both the
cable and to AC power.
Remove and re-insert the MC32N0 into the MC32N0 cable
cup, ensuring it is correctly seated.
Ensure the cable is receiving power. Ensure MC32N0 is
seated correctly. If the MC32N0 battery is fully depleted, it
can take up to five hours to fully recharge a Standard Bat-
tery and it can take up to eight hours to fully recharge an
Extended Life Battery.
Verify that other batteries charge properly. If so, replace
the faulty battery.
Remove and re-insert the MC32N0 into the cable cup, en-
suring it is correctly seated.
Re-attach the cable and retransmit.
See the system administrator.
See the system administrator.
MN000887A01-B | April 2015