Universal Battery Charger (Ubc) Adapter; Spare Battery Charging; Ubc Adapter Led Charge Indications - Motorola MC3000 User Manual

4 - 10 MC3000 User Guide

Universal Battery Charger (UBC) Adapter

Ensure that you follow the guidelines for battery safety described in
CAUTION
The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with
the four station UBC2000 to simultaneously charge up to four spare batteries. For additional information on the
UBC 2000, refer to the UBC 2000 Quick Reference Guide p/n 70-33188-xx.
Use only a Symbol approved power supply output rated 15 VDC and minimum 1.5 A. Use of an alternative
CAUTION
power supply will void the product warranty and may cause product damage. See
for the power supply regulatory compliance statement.

Spare Battery Charging

To charge spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first.
2. Pivot the top of the battery down onto the contact pins.
Battery Clip
Figure 4-5 UBC Adapter Battery Insertion
3. Gently press down on the battery to ensure proper contact. The Standard Battery usually charges in less than
four hours and the Extended Life Battery usually charges in less than six hours. See,
for charging status indications.
4. When charging is complete, press the battery clip and lift the battery out of the slot.

UBC Adapter LED Charge Indications

The UBC Adapter charging LEDs indicate the battery charging status. The Standard Battery usually charges in less
than four hours and the Extended Life Battery usually charges in less than six hours.
2
Battery
1
UBC Adapter
Spare Battery
Charging Slot
Battery Safety Guidelines on page
Appendix C, Regulatory
Table 4-2 on page 4-11
5-1.