Windows Mobile 6.1 Devices; Performing A Warm Boot; Performing A Cold Boot; Waking The Mobile Computer - Motorola MC3000 User Manual

Calibrate the touch screen. See
2.

Windows Mobile 6.1 Devices

There are two reset functions, warm boot and cold boot.
A warm boot restarts the mobile computer and closes all running programs.
•
A cold boot also restarts the mobile computer and closes all running programs but also resets the
•
Real-Time-Clock (RTC).
Data saved in flash memory or a memory card is not lost. Perform a warm boot first. This restarts the mobile
computer and saves all stored records and entries. If the mobile computer still does not respond, perform a cold
boot.

Performing a Warm Boot

To perform a warm boot on 28, 38 and 48-key keypad configurations:
Press and simultaneously hold 7, 9 and Power. Do not hold down any other keys or buttons.
1.
As the mobile computer initializes Today screen appears.
2.

Performing a Cold Boot

A cold boot restarts the mobile computer. The operating system and all applications are restarted. File storage is
preserved. The Real-Time-Clock (RTC) resets. Only perform a cold boot if a warm boot does not solve the
problem.
To perform a cold boot 28, 38 and 48-key keypad configurations, simultaneously press and then release the 1,
1.
9 and Power keys. Do not hold down any other keys or buttons.
As the mobile computer initializes, the splash window,
2.

Waking the Mobile Computer

The wakeup conditions define what actions wake up the mobile computer after it has gone into suspend mode. The
mobile computer can go into suspend mode by either pressing the Power button or automatically by Control Panel
time-out settings. These settings are configurable and the factory default settings are shown in
Wakeup Default Settings
Table 2-12
Condition for Wakeup
AC power is applied.
Mobile computer is inserted into a cradle.
Mobile computer is removed from a cradle.
Mobile computer is connected to a serial device.
Mobile computer is connected to a USB device.
Mobile computer is disconnected from a USB device.
A key is pressed.
Calibration Screen on page 1-10
Figure 1-7 on page
Power Button
No
No
No
No
No
No
No
Operating the MC3000 2 - 35
to calibrate the mobile computer screen.
1-9, appears for about a minute.
Table
Automatic Time-out
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2-12.