Ubc Adapter - Motorola MC3000 User Manual

Table 5-5 Troubleshooting the Four Slot Spare Battery Charger (Continued)
Symptom
Spare battery is not
charging.

UBC Adapter

Table 5-6 Troubleshooting the UBC Adapter
Symptom
Battery Charging
LED does not light
when spare battery
is inserted.
Battery not charging.
Possible Cause
Charger is not Ensure the power cable is connected securely to both the charger
receiving power. and to AC power.
Spare battery is not Remove and re-insert the battery into the charger, ensuring it is
correctly seated. correctly seated.
Spare battery was Ensure charger is receiving power. Ensure the spare battery is
removed from charger seated correctly. If a battery is fully depleted, it can take up to four
or charger was hours to fully recharge a Standard Battery and it can take up to six
unplugged from AC hours to fully recharge an Extended Life Battery.
power too soon.
Spare battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Possible Cause
Spare battery is not
correctly seated.
Charger is not receiving
power.
Spare battery is not
correctly seated.
Spare battery was
removed from charger
or charger was
unplugged from AC
power too soon.
Spare battery is faulty.
Maintenance and Troubleshooting
Solution
Remove and re-insert the spare battery into the charging slot,
ensuring it is correctly seated.
Ensure the power cable is connected securely to both the charger
and to AC power.
Remove and re-insert the spare battery into the charger, ensuring
it is correctly seated.
Ensure charger is receiving power. Ensure the spare battery is
seated correctly. If a battery is fully depleted, it can take up to four
hours to fully recharge a Standard Battery and it can take up to six
hours to fully recharge an Extended Life Battery.
Verify that other batteries charge properly. If so, replace the faulty
battery.
Solution
5 - 7