Cables - Motorola MC31XX Series Integrator Manual

Cables

This section describes how to setup and use the cables. The cables are available with a variety of connection
capabilities.
The following MC31XX Communication/Charge cables are available:
•
Serial (RS232) Charge cable (9-pin D female with power input receptacle)
•
USB Client Charge cable (standard-A connector and a barrel receptacle for power).
The following printer cables are available directly from the printer manufacturer:
•
O'Neil printer cable
•
Zebra printer cable.
•
Monarch printer cable.
Cables (MC31XX Connector)
Figure 2-18
The MC31XX Communication/Charge cables:
•
Provide the mobile computer with operating and charging power when used with the Motorola approved
power supply.
•
Synchronize information between the mobile computer and a host computer. With customized or third party
software, it can also synchronize the mobile computer with corporate databases.
•
Provide serial connection through the serial pass-through port for communication with a serial device, such
as a host computer. For communication setup procedures, see
•
Provide USB connection through the USB pass-through port for communication with a USB device, such as
a host computer. For communication setup procedures, see
Dedicated printer cables, provide communication with a dedicated printer.
Chapter 3, ActiveSync.
Chapter 3, ActiveSync.
Accessories 2 - 19