Adj.:
Three different point types and some combinations
of them can be selected: Line-, Intermediate- and
StakeOut-points. All points belonging to the selec-
ted point-types are adjusted.
<CONT>
<RESET> to reset the FixPoints and heights H to
their default values.
Fixpoint 1:
Default for FixPoint 1 is the first point of the se-lec-
ted line. Any point of the line can be selected.
Fixpoint 2:
Default for FixPoint 2 is the last point of the se-lec-
ted line. Any point of the line can be selected as
long as it is different from FixPoint 1.
H:
Defaults for H are the measured heights. Enter the
fixed heights here after selecting the FixPoint ID's.
Changing the PixPoint ID will reset H.
<CONT> to calculate the misclosure and to view
the results. A message appears if the misclosure
exceeds the closure tolerance.
DNA-Dde 46
90
DNA-Dde 47