Leica DNA03 User Manual page 63

Point-to-point
First enter all required values and then trigger the
measurement with the trigger key.
INTERMEDIATE (BS to Pt)
Next:
RemN:
Last:
Pt2 :
dH2 : -1.0000 m
Pt2H: 110.0000 m
<QUIT> <BS to Pt>QC
Entries:
Next
Enter the point number to be measured next. Point
numbers are sequential and are incremented with
every measurement.
RemN:
Remarks on measurements
After the measurement
Last:
The point number of the last measured point
1003
------
A1
1002 EC
DNA-Dde 15
Pt2:
The point number of the current measured point
dH2:
The height difference from the current measured
intermediate point to the last measured point.
Pt2H
The height of the current measured intermediate
point.
<Pt to BS>
Returns to the "intermediate point to backsight
point" screen
<QUIT>
Exit from intermediate sight display and return to
foresight display.
63