Toshiba PORTEGE S100 Maintenance Manual page 238

4 Replacement Procedures
4.9 HDD
CAUTION: When handling the HDD, do not press the top surface as shown by the arrow.
Hold it by the sides.
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-8 and 4-9.
1. Loosen the screw (with e-ring) fixing the HDD cover and remove the HDD cover.
2. Hold the tub to raise the HDD assembly straight and remove the HDD assembly from
the connector of the HDD cable.
HDD assembly
HDD cable
4-20
Figure 4-8 Removing the HDD cover
HDD cover
Screw (with e-ring)
PORTEGE S100 Maintenance Manual (960-508)
4.9 HDD