Toshiba PORTEGE S100 Maintenance Manual page 108

3.3 Check of the RAID configuration
3.3.2 Check of the screen display
Contents of the screen displayed are shown below.
3.3.2.1 RAID-1
When the "RAID-1" is displayed in the
configured by two drives.
TOSHIBA RAID / RAID Information Display
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
LD0 RAID-1
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Port Assgn Status
0 LD0-0 ONLINE
1 LD0-1 FAILED
< RAID : not OPTIMAL >
3.3.2.2 RAID-0 (1)
When there is one LD and "RAID-0 OPTIMAL" is displayed in the
it is judged that the RAID is configured by two drives.
TOSHIBA RAID / RAID Information Display
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
LD0 RAID-0 OPTIMAL
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Port Assgn Status
0 LD0-0 ONLINE
1 LD0-1 FAILED
< RAID : not OPTIMAL >
PORTEGE S100 Maintenance Manual (960-508)
Status Capacity
DEGRADE xxGB
: Enable
: Yes
: Disable
: Enable
Size
xxGB FUJITSU--------------
xxGB FUJITSU--------------
Status Capacity
xxGB
: Enable
: Yes
: Disable
: Enable
Size
xxGB FUJITSU--------------
xxGB FUJITSU--------------
shown below, it is judged that the RAID is
Rev xx.xx.xxxx
Model
Rev xx.xx.xxxx
Model
3 Tests and Diagnostics
Rev
xxxxxxx
xxxxxxx
shown below,
Rev
xxxxxxx
xxxxxxx
3-11