Toshiba PORTEGE S100 Maintenance Manual page 254

Personal computer

Hide thumbs Also See for PORTEGE S100:

Table of Contents

4 Replacement Procedures

Installing the SW board

To install the SW board, follow the steps below and refer to Figure 4-19.

1. Turn up the insulator and connect the SW cable to the connector CN3260 on the

system board.

2. Install the SW board and secure it with the following screws.

3. Install the switch cover and secure it with the following screw.

S-FLAT HEAD screw

PORTEGE S100 Maintenance Manual (960-508)

4.14 SW board

Chapters

Table of Contents