Toshiba PORTEGE S100 Maintenance Manual page 309

4.29 Fluorescent Lamp
Sticking the tapes and insulation sheet
1. Stick the double-sided tape of the PCB insulation sheet.
2. Stick the bezel tape2 (one point).
3. Stick the bezel tape1 (two points).
4. Stick the tape for fixing the FL cable (one point).
CAUTION: When sticking the insulation sheet, be careful not to damage the PCB, cell
and B/L.
(3) Bezel tape 2
(1) Fixing tape for FL cable
Figure 4-63 Replacing 14.1 Inch TMD fluorescent lamp (SXGA+) (11)
PORTEGE S100 Maintenance Manual (960-508)
Insulation sheet
(4) Fixing tape for
(2) Bezel tape 1
Stick the tapes, making the dent of the bezel as a guide
4 Replacement Procedure
insulation sheet
4-91