Detail Of Setting Mode - Daikin R-410A Service Manual

SiBE39-402A
3.3

Detail of Setting Mode

3.3.1 Cool / Heat Mode Switching
There are the following 2 cool/heat switching modes.
$ Set cool/heat separately for each outdoor unit system by indoor unit remote controller.
% Set cool/heat separately for each outdoor unit system by cool/heat switching remote
$ Set Cool/Heat Separately for Each Outdoor System by Indoor Unit Remote Controller
# It does not matter whether or not there is outdoor - outdoor unit wiring.
# Set outdoor unit PC board DS1-1 to "indoor" (factory set).
# Set cool/heat switching to "individual" for "Setting mode 1" (factory set).
Test Operation
controller.
C/H SELECT
TEST
MODE
MALFNC.
IND SLAVE
MASTER
H1P H2P H3P H4P
C/H SELECT
Dip SW.
DS1-1
C/H SELECT R.C.
Indoor unit Indoor unit
L.N.O.P. DEMAND
H5P H6P H7P
Field Setting
87