Remote Controller Service Mode - Daikin R-410A Service Manual

Troubleshooting by Remote Controller
1.5

Remote Controller Service Mode

You can take "service data" and make a "service setting" in the service mode, with operating the
How to Enter the
Service Mode
Normal operation
mode
Push the
Service Mode 1. Select the mode No.
Operation Set the desired mode No. with the
(For wireless remote controller, Mode 43 only can be set.)
Method
2. Select the unit No. (For group control only)
Select the indoor unit No. to be set with the time mode
3. Make the settings required for each mode.
In case of Mode 44, 45, push
(LCD "code" blinks.)
For details, refer to the table in next page.
4. Define the setting contents. (Modes 44, 45)
Define by pushing the timer
After defining, LCD "code" changes blinking to ON.
5. Return to the normal operation mode.
Push the
104
button on the remote controller.
button for 4 seconds or longer.
button.)
button one time.
Field set
mode
Push the button for 4 seconds or longer.
button.
button to be able to change setting before setting work.
button.
SiBE39-402A
Service
mode
. (For wireless remote controller,
Troubleshooting