Reading Out Information; Space Heating/Cooling Control; About Space Heating/Cooling Control; Setting The Space Operation Mode - Daikin Altherma 3 H MT F+W User Reference Manual

5 | Operation

5.5 Reading out information

5.6 Space heating/cooling control

5.6.1 About space heating/cooling control

5.6.2 Setting the space operation mode

User reference guide
26
To read out information
1 Go to [8]: Information.
Possible read-out information
In menu...
[8.1] Energy data
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
[8.8] Connection status
[8.9] Running hours
Controlling space heating/cooling typically consists of the following stages:
1 Setting the space operation mode
2 Controlling the temperature
Depending on the system layout and installer configuration, you use a different
temperature control:
▪ Room thermostat control
▪ Leaving water temperature control
▪ External room thermostat control
About space operation modes
Your unit can be a heating or a heating/cooling model:
▪ If your unit is a heating model, it can heat up a space.
You can read out...
Produced energy, consumed electricity,
and consumed gas
Malfunction history
Contact/helpdesk number
Room, tank or domestic hot water,
outside, and leaving water temperature
(if applicable)
Status/mode of each actuator
Example: Domestic hot water pump
ON/OFF
Current operation mode
Example: Defrost/oil return mode
Version information about the system
Information about the connection
status of the unit, the room thermostat
and the LAN adapter.
Running hours of specific system
components
ETVH/X12S(U)18+23EA6V+9W + ETBH/X12EF6V+9W
Daikin Altherma 3 H MT F+W
4P634888-1 – 2021.03