Detail Of Setting Mode - Daikin Super Multi Plus D-Series Service Manual

Field Setting
3.2

Detail of Setting Mode

3.2.1 Cool / Heat Mode Switching
There are the following 2 cool/heat switching modes.
Set Cool/Heat Separately for Each Outdoor System by Indoor Unit Remote Controller
118
Set cool/heat separately for each outdoor unit system by indoor unit remote controller.
Set cool/heat separately for each outdoor unit system by cool/heat switching remote
controller.
Set outdoor unit PC board DS1-1 to "indoor" (factory set).
Set cool/heat switching to "individual" for "Setting mode 1" (factory set).
C/H SELECT
TEST
MODE
MALFNC. IND SLAVE
MASTER
H1P H2P H3P H4P H5P
C/H SELECT
O
Dip SW.
DS1-1
I
C/H SELECT R.C. TO BP
A B C F1 F2 F1
F1 • F2 F1 • F2
BP unit BP unit
SiEBE18-526
L.N.O.P. DEMAND
H6P H7P
F2
(Q0405)
Test Operation