Troubleshooting By Remote Controller; The Inspection / Test Button - Daikin R-410A Service Manual

SiBE39-402A

1. Troubleshooting by Remote Controller

1.1

The INSPECTION / TEST Button

The following modes can be selected by using the
Indoor unit settings can be made
• Filter sign time
• Air flow direction
• Others
Depress
for more than 4 seconds.
Press
You can confirm following three
codes with respect to each push
of the button.
• Malfunction codes
• Indoor model code
• Outdoor model code
Troubleshooting
Depress
for more than 4 seconds.
Local
setting
mode
button
Normal
mode
button once.
After 10 seconds
Inspection
mode
Press button once.

Troubleshooting by Remote Controller

button on the remote control.
button
Service data can be obtained.
• Malfunciton code history
Service
• Temperature data of various sections
mode
Service settings can be made.
• Forced fan ON
• Air flow direction/volume setting
Press button once.
Press button once.
Or after 30 minutes.
The thermostat is turned on by force
Test
when the "trial-operation mode" is
operation
started (the remote controller displays
mode
"trial-operation").
(V0815)
99