Wiring
Remote I/O Terminal
Connector Terminal Block
Converter Unit
External View
16
The Remote I/O Terminal in the table below is recommended for transistor out-
put.
Model
Specification
G7TC-OC08
Common (+)
Note One P7TF-OS08 I/O Terminal and two G7T-1112S Relays may be
purchased separately and used.
Wiring Diagram
24 VDC
Wiring to the heater
The Connector Terminal Block Converter Units in the table below are recom-
mended for voltage output and current output type.
Model
Terminal screw size
XW2B-20G4
M 2.4
XW2B-20G5
M 3.5
Relays used
8 x G7T-1112S (max. resistive load: 220 VAC, 2A)
External View
Section 2-3